You can rent a pressure washer from a hardware store or equipment rental outlet. Unless they are used with one, you need to do to lose some indications that the first wooden bridge, but.
Before you begin:
Buy pressure washers and the detergent recommended for coatings. Do not use bleach. Biodegradable products are gentle on wood and will not harm grass or flowers near. Make sure clothing and shoes, gloves andSafety glasses. Apply a clock. Check if the disc has a special nozzle for cleaning decks, as well as brush and floor brush attachments. This nozzle is designed to be a fan of water instead of a focused beam that can damage the soft wood. Close all windows and doors. Make sure there are no people or animals about to be violated. Remove all furniture and other objects. Sweep the deck to remove loose dirt.
Pressure to wash your wooden deck:
Hook the camera up to aCold water nozzle and connect the bridge safely. Imagine the pressure to 1200 psi. It may increase up to 1500 psi or so, when you get going. Conducted with the nozzle from the stack, start the washing machine. Moisten with water before the bridge with a slight rocking motion, as if playing golf. Continue to move the nozzle. Remain 3-4 feet above the bridge and start down slowly and constantly checked for any damage to the forest. Out the work from home to avoid sprayingWindows and lighting, which can break from the pressure. Stay away from power outlets and lights. Then you add the laundry detergent and spray lightly on the bridge yet to determine the start time. Working in the portions when the cover is great. Scrub with a brush properly. Let the detergent recommended for most. For many products, 5-10 minutes is the maximum, while others are up to 15 minutes. Err on the side of caution the firstTime. Also, do not let the dry cleaner and leave marks. You can of water or detergent than necessary. Finally, spray the deck with clean water, with the nozzle at the top. Continue to remove him a few times, all cleaning agents and dirt. If you want to use paint, stain or sealer, let the wood dry for at least 24 hours before.
0 comments:
Post a Comment